Towel to cake strip upcycle

This is the second of two blog posts about what you can do with a towel that is showing wear. In addition to sewing, I also like to bake.  And cake is one of my favorite things to bake. 

If you want your cake to turn out flat you need cake strips. You wet the strips and wrap it around the pan. Then you put the cake in the oven. The evaporation of the water will cool the outside of the pan so that the center of the cake cooks at the same rate as the outside, preventing the cake from doming. 

This is a cake strip that I bought ready-made several years ago. As you can tell it is on its last legs. The heat resistant coating has burned off in places.  These strips were purchased to replace a set of cake strips I had made from an old towel as suggested by a cake decorating instructor.  

 

I used the purchased cake strips for many years, but honestly my old ones made from a towel, worked better. They soaked up more water, the cakes turned out flatter and the strips fit my pans better.

So when one of my hand towels was showing wear, I decided I should make cake strips with it. First I trimmed the edges of the towel. Then, I cut the towel into thirds length wise. The pieces were approximately 4.5 inches high and  24 inches long. I was aiming to make two cake strips. The length of the towel was not quite long enough to use as a cake strip so I took one of the thirds and cut it in half so it was about 4.5 inches high and 24 inches long. 

I pieced together the 4.5 x 24 inch piece with the 4.5 X 12 inch piece. I used an elastic stitch so that I would not have a bulky seam. I went back and forth a few times. I used 100% cotton thread because I did not want melting thread in the oven.

 

Then I folded the towel in half and sewed a zig zag stich near the raw edge.  I also added a zig zag up the middle to help reinforce the towel where it was worn. I do own a serger, but I did not feel like creating three or four cones of all cotton thread, so I used the sewing machine. 

Here is the finished product around the pan, attached together with all metal pins. I don't generally bake cakes for myself and a cake this size would need to be eaten by several people so there is no batter in the pan. I can't wait until I can bake for people again.

Mending a towel

Sewing is an imminently practical art form. It allows you to fix what you have and make what you want to your specifications. This is the first of two posts about what you can do with a towel that is starting to show wear. These projects are both simple, perfect if you are just starting to sew with a machine. And most of us will have material to work with. 

Towels often wear out first around the edges. Often when this happens, the rest of the towel is still in pretty good condition. You can fix the towel fairly quickly and easily.

This is the beach towel I mended today. You can sees strings hanging off and the frayed edges.

 

I started this project by using a seam ripper to take out the edging that was still intact. I then trimmed off the fraying part with a rotary cutter. You could use scissors as well. 

Then I took the towel to my sewing machine and sewed a zig zag stitch up both sides of the towel, backstitching at the ends so the stitching does not unravel.  This towel didn't have any holes in them, but on other towels I just worked a zig zag stich back and forth over the hole to patch it up. 

I have done this with several towels in the last couple years. There will be some fraying at the edges until it reaches the zig zag stitch, but the stitch will prevent it from fraying more and will allow you to use the towel for a few more years.