Low-waste celebration

I turned 52 a few weeks ago and I threw myself a low-waste birthday picnic at a local park. We have been hosting low-waste gatherings at home, but this practice may not have been completely obvious to our guests.  I was not going to drag all the breakable dishes we use at home to a picnic site  Instead of gifts, I explicitly asked people to help me reduce single-use items by bringing a water bottle and reusable plates and dishes but that I would provide these if people weren't able to.  

I used my existing stash of sheets, scarves and tablecloths to cover the picnic tables. I purchased small gourds for decorations. We also brought all of our plastic camping and kid dishes and a tray of disposable silverware I typically wash and reuse.  

My neighborhood requests people bring their own dishes at neighborhood block parties so my idea was not original, but it was unfamiliar to some. People were good sports and genuinely tried to honor my birthday ask.

We labeled a paper bag for recycling and a tote for dishes and put out an unlabeled bucket with a compostable bag for organics. We did not have a good method to block off the garbage cans, which were chained down to the picnic shelter structure. t Conventional recycling mostly ended up in the right place. I fished one aluminum can out of the garbage. We had one minor disaster in which the bag blew off the table shattering one empty bottle. 

Some food waste found its way into the bucket, but more went into the garbage can. I assume people were less experienced recycling food than recycling aluminum cans. The lack of labels did not help. Organics recycling is newer in the Twin Cities and not all communities offer it. I did not fish the food out of the garbage can. 

We succeeded in directing most of the plastic packaging from ice and snacks into the bags for eventual Ridwell disposal, but we had to proactively tell people we could recycle that. 

Some guests expressed appreciation for the low-waste efforts and said more people needed to do it. Others were perplexed by the whole thing. Some brought disposable plates and we ended up with one packaged bottle of water when the event was over. One friend was super enthusiastic and brought their vegetable platter and carrot hummus in a giant metal catering container. 

I estimate saving thirty dollars by not purchasing disposable or compostable serving ware, but washing dishes after the event took time. Luckily my teenager volunteered for that job. I also had to run one load of laundry for the table coverings, but I added other clothes to the load. This article covers the inputs from washing versus using disposables. 

Guests took home some of the gourds. The others are serving as fall decorations/squirrel food on my front porch. 

Doom crochet

We have now breached a year of 1.5 c of warning for a year, a decade before people thought it would happen.  Almost no one is talking about it. Our 80+ year-old president has COVID for the third time. Election season gets more wild by the day. And some stressful things happened at work.

I like machine sewing because I can make useful things. But it doesn't help me channel distress and anxiety. It doesn't prevent me from spending too much time online doom scrolling either. But, I have found one thing that helps me do that. Over the past several months I have taken up a new fiber art, crochet. 

Every so often for the past 30 years, I would try to teach myself to crochet and would never progress much further than making a foundation chain. But this time, I just kept working and reworking until I could crochet competently.  My biggest challenges have been random increases and decreases. To counter this, I realized I need to regularly count my stitches. I also still have problems following complex directions in patterns, but again I just committed to doing and redoing 

I like how rhythmic crochet is - it's rhythmic enough to be soothing. I also find one needle handier to transport and work with in various settings than the two needles of knitting. I have used crochet to make it easier to wait in long lines, deal with delayed flights, get through contentious meetings,  pay attention in long training and channel my worry. Now when my kid says, "I bet you were wasting time on Twitter," I can replay,  "no I was crocheting."

Doom crochet makes everything a little less painful while the world burns.

Here is a set of tutorials I like: 

• How to Crochet for Beginners: A Complete Guide - Sarah Maker 

\

Here are the links to the patterns I used to make the items pictured above:

• Mini R2D2 Pattern – Miigu by Mia Croche & Amigurumi (miahandcrafter.com)
• Cubs Crochet | The large one is a coaster and the small one … | Flickr
• Crochet Jewelspun Scarf [Free Video Tutorial & Written Pattern!] — Hooked by Robin

Getting started with whole grain baking

White flour is odd. It's an example of people using technology to create something, then needing more technology to solve the problems caused by the creation. White flour, also called all-purpose flour, simply lacks the complex flavor and texture of its whole-grain counterpart. 

Milling processes developed in the late 1800s stripped out the germ and bran of the wheat berry. This increased shelf life and enabled higher-rising bread. Bu According to Michael Pollan's book Cooked: A Natural History of Transfomation what was left was starch devoid of nutrition and led to people developing diseases that they had not had before they began eating refined flour.

In the 1940s, governments convinced the industry to add key nutrients back into the flour. However, as Pollan writes: "Rather than go back to address a problem at its source—the processing of key nutrients out of wheat—the industry set about processing the product even more. This was sheer brilliance: The milling industry could now sell the problem and the solution in one neat package."

Today the consumer (you and me) can't purchase great whole grain options at the store. Packaged whole-wheat bread resembles cardboard. A lot of loaves labeled multi-grain are still mostly white flour. Granola bars contain a lot of sugar. 

If you want flavorful and healthy whole-grain foods, you will likely need to make them yourself.  This post, the first in a series on whole grains, is geared toward people starting to bake with whole grains.

Quick breads are the easiest way to embark on a whole-grain journey. Quick breads are typically leavened with baking powder or baking soda plus an acid. Think banana bread, pancakes and scones.  I have come across recipes and blogs that say you can't just swap white bread for whole grain. I disagree. I do it all the time in quick breads. A good start is to swap half of the all-purpose flour for whole wheat flour. If you want a little less hearty flavor use spelt flour or white whole wheat. 

The picture at the top is a scone recipe from Martha Stewart in which I replaced the entire two cups of all-purpose flour the recipe calls for with spelt flour. I also used craisins instead of currants.  If you want to cook with recipes that begin with whole grain, I recommend the cookbook King Arthur's Whole Grain Baking. 

Please stay tuned for future blog posts on yeasted breads and milling your own grains.

Ridwell - a great service to share

Our family purchases minimally packaged items, composts food waste and recycles the glass, plastic and paper accepted by city recycling.  And of course, I upcycle. Despite these efforts, we are left with difficult-to-recycle items such as batteries, multi-layer plastic and electronic devices.

Manufacturers ultimately need to become responsible for the disposal of what they create. However, we are a long way from that becoming a reality and it is up to the consumer (me) to make these choices. About a year ago, I became aware of a service called Ridwell when I saw neighbors' boxes out and conversations appeared on the local zero-waste Facebook pages.  Four months ago, I signed up for Ridwell.

Ridwell offers specialty recycling in metropolitan areas such as the Twin Cities, Seattle and San Francisco. There are different options for pricing. The highest tier in my area costs $24 a month (pick up every other week) and includes multilayer plastic, styrofoam, light bulbs and batteries. Users can also select one featured item for each pickup. Metal bottle tops, cords and cables are regular options. Ridwell also offers special categories periodically. 

One of the things I realized in the first weeks of using Ridwell is that there are free local drop-off options for many of the items Ridwell accepts. Prior to signing up for Ridwell, we took plastic bags to Target, batteries to Ramsey County Hazardous Waste, e-waste to Repowered and clothing to Goodwill.  We had also been purchasing Terracycle boxes for multi-layer plastic.  For us, having those items picked up regularly has been really nice. We no longer arrive at Target and say "Darn, I forgot those bags."  For those who are more cost-conscious, the monthly fee may not warrant using Ridwell. 

Ridwell is not single sort and is best for the motivated.  Ridwell provides labeled reusable bags to place items in. My family has difficulty distinguishing between plastic film and multi-layer plastic. I have carefully read the directions. so I have less of an issue. My teenager complains about this. I retort, "Blame the manufacturers for this problem, not Ridwell."

Another recommendation I have about Ridwell is to share. We signed up for the unlimited plan because it accepts the largest variety of items. But it is hard for only our family to fill up the bin. Two neighbors regularly drop off multi-layer plastic and styrofoam. I will also put out a call on Facebook if we have room in our featured item bags.

I also appreciate the text message reminders about pickups and their monthly dashboard. I haven't forgotten to put out my bin.

A family member who also uses Ridwell has complained that if Ridwell cancels a pickup, they still charge you, but we haven't yet experienced this.  

My verdict is Ridwell is a helpful service we will continue to use, but you can strive to be zero waste without.  

The rug is finally done

After more than two years, the locker hook rug project is complete! You can read more about the technique in a previous blog post.  After  locker hooking for many more hours, I finally reached the center.

I tore off the duct tape I had placed to keep the canvas edges from scratching me, folded over the canvas and whip stitched the edges.

I finished it just in time to place on my landing after a painting and carpet replacement project. I choose the turquoise accent paint color to match the rug.

This project used a lot of fabric. I lost count of how many old shirts, pants, sheets and socks went into the rug. It included old clothes from my family and thrifted items. I placed a rug pad that I found in my local Buy Nothing group under the rug to keep it from slipping.

Someday, if I decide to make another locker hook rug, I will use a more flexible canvas. I read this suggestion before I started this project and failed to heed the advice because I would have had to purchase the canvas online rather than locally. It would have been easier to pull the loops through a less stiff canvas.

As the project went in, I got better about assessing the thickness of the fabric and varying the width I cut strips. In the beginning, some strips were too thick, difficult to pull through and made my arm muscles sore. Rugs are bulky and as the project progressed I had to come up with ways to keep working on it by propping it up on pillows on the couch so I could get underneath it.

Overall, I am pleased with how it turned out and looks in my landing and relieved I have crossed this project of my list.

Learning is struggle or mending a wool sweater

I see two types of sewing tutorials online. One comes from highly skilled people They make everything seem easy, but I have enough experience to know it would take me years to achieve their level of proficiency.  The other comes from people who actually do crappy work. They also make it look easy, but I have enough experience to know they are not worth emulating. By and large, no one tells you that learning these skills can be difficult. I am here to do just that. 

Last winter my spouse showed me a favorite wool sweater that had developed several holes. He wasn't sure if they had been caused by moths or wear and time. I tossed the sweater in my bin of items for mending/upcycling and it sat there for a year. 

It caught my eye when I was going through the bin intending to reduce the volume of fabric inside. The sweater was taking up a lot of room.  My spouse prefers mending not to be startlingly visible and it seemed like a good opportunity to try Swiss darning for the first time. Swiss darning is a method that duplicates the stitches in the sweater. If you use similar colors it can be relatively invisible.

Using the technique was harder than I anticipated. I struggled. I first attempted to follow the tutorial in the book Modern Mending.  I couldn't quite get it to work. I had difficulty with the geometry of the stitching and the fact that the yarn in the sweater had felted and I couldn't clearly see the stitches I needed to duplicate. Then, I went to this Youtube Video on Swiss darning and attempted their way of Swiss darning. I also checked out other online resources. Alas, none improved my technique.

After I had toiled away for several hours, my spouse noticed I was working on his sweater and,  said, "I didn't realize that I gave you that sweater to mend." I did manage to close a few holes, but in no instance did my mending stitches actually follow the sweater stitches in the way it was supposed to. I would probably have been better off using a woven darn, which I am more proficient at.

I couldn't use Swiss darning on some of the larger holes near the top of the sweater due to their shape and location and decided to patch them. Even though I know how to patch, this took me a few attempts. To complete these, I used my sewing machine to sew around the hole to keep it from unraveling further. I then used a zig-zag stitch to machine sew on patches cut from fleece scraps The patches puckered and looked really stupid so I undid the machine stitching and then hand-stitched the patches using a blanket stitch. 

After all this work, my spouse declared he felt he had to continue wearing the sweater since I had put so much time into fixing it so there was one small victory in all of this. 

I will try Swiss darning again in the future and hopefully it will go better next time.  

Upcycling to reduce an annoying night time glow

Some people sew and craft for artistic reasons. I have a drive to make stuff, but I want my creations to solve problems in my life. One of my recent annoyances was the glow from controls on a HEPA air purifier we purchased about a year ago. It put out enough light to be bothersome at night. 

At first, my spouse and I tried to address the problem by covering the controls with a sock. Then someone would decide to wear the sock or it would fall off and we would be back where we started. After enough of this, I decided to sew my way out of this problem. 

I found an upholstery sample from my stash that I did not have another use for.  I measured the diameter of the glowing controls on the filter.  I used a lid to create a circle pattern that was about an inch longer than the circle on the filter.  I then cut two circles from the upholstery fabric and pinned a long ribbon from my stash onto the right side of one of the circles. (I admit I originally pinned it to the incorrect side and had to redo it, but the instructions here are correct). I then stitched the circles right sides together using a 1/2 inch seam allowance and leaving about an inch opening.

I then notched the circle, turned it inside out and hand stitched the opening using a whip stitch. I then top stitched around the perimeter of the circle. 

I mentally cycled through various options to secure the ribbon to the filter.  At one point I was leaning toward using some sort of command hook. But after letting it percolate a bit, I figured out the easiest thing was to just tie the ribbon around the cord where it inserted into the machine. I applied fray check on the end of the ribbon to keep it from unraveling. 

This simple and quick project took me an hour and solved the problem. The double-layer upholstery fabric is heavy enough that it stays in place even with the air flow of the filter and does not let the light through. The fact that it is secured to the machine means that we won't lose it. My spouse was impressed with my genius, which was an added bonus. 

Quilted table cloth that stays on table

One of the more substantial projects I have completed in the past few years was a quilted tablecloth for our coffee table. Way back before we had a child, we left the table bare. But alas the child came along and quickly scratched and dented the table forcing us to cover it. Of course, we didn't have a coffee-table-sized cloth so we folded a sheet to fit the table and put binder clips around the edges in an attempt to keep it on the table. As you can see, that didn't work so well.  

I had wanted for some time to make a quilted item with denim and had already collected old jeans from people in my local Buy Nothing group. 

Planning the project 

One of the main reasons to sew your own is that you can customize for your exact needs. I wanted a tablecloth that fit our table. The tablecloth needed to be thick enough to take abuse from the kid, but thin enough to balance a cup of coffee on. I also wanted the tablecloth to stay on the table, which I knew would be a challenge with my kid. 

Once I determined what I needed the tablecloth to do, I determined the size and shape of the finished project.  The table top measured 49 1/2 inches by 19 1/2 inches. I initially had planned slightly smaller, but the finished tablecloth ended up being 59 1/2  by 30 1/2 inches. 

I wanted shaping in the corners so I considered whether I would sew corner seams or add the shaping another way. I decided to sew a flat rectangle that I would gather slightly at the corner with hand sewing. 

The next step was to decide on the materials. I knew the top layer would be denim. I selected a piece of relatively unattractive upholstery fabric I had acquired as the batting or middle layer. I decided to use a duvet cover that I had purchased for $5 at a thrift shop for the bottom layer and binding. 

Piecing the denim 

I  cut the seams and worn and torn areas from the many jeans I had collected. I decided that the length of my quilt blocks would simply be the width of the final quilt.  

I created both wider and narrower blocks.  For the width of the larger blocks, I laid pieces of similar size together and made blocks that varied from 6 and 8 inches, plus a 1/4 inch seam allowance on each size. I also created narrow blocks that were 2 inches plus a 1/4 inch seam allowance on each side, totaling 2 1/2 inches. 

For the wider blocks, I cut the jeans to the width and then laid the pinned pieces right sides together and, using a denim needle, stitched using a 1/4-inch seam allowance. I pressed seams open as I went. The denim was easy to work with and while it took several days, the quilt top came together more quickly than I had anticipated. 

Once I had several blocks, I started stitching them together  (right sides together then pressing open) with a 1/4 seam allowance). Occasionally I laid the quilt top on the table to determine if my initial size calculations were correct. In doing this, I decided to add both length and width to the quilt. 

Once I finished the quilt top, I created my sandwich with the quilt top on top, the upholstery fabric in the middle and the duvet cover on the bottom. I cut the two bottom layers bigger than the quilt top because I knew that things could shift when I started stitching the layers together. I used plates from adjustable hand weights to ensure that everything was straight and taught. I pinned the layers together. 

I used a quilting foot to secure the layers. I started in the center and "stitched in the ditch" between the quilt blocks. I also stitched roughly in the middle of the wider blocks as well.  I also added some perpendicular seams as well.  The quilting was more arduous than I had expected. The three layers together were fairly bulky and took effort to navigate through my non-professional home machine. I had to fold and secure the edges with binder clips so  I could fit it through At some point I got a little sick of this part of the project and went onto one of my Facebook upcycling pages and asked if I could stop with the quilting stitches.  The replies I received said because I was using fabric in my middle layer instead of quilt batting, I could get away with less stitching than if I had been using batting, I was ok with that answer. 

Once the pieces were quilted together, I trimmed the edges of the bottom two layers.  

 A lot of fabric remained from the duvet cover, so I used that for the binding. I cut along the diagonal or bias in widths of 2 inches.  I folded and pressed it into 1-inch bias tape. I pinned one side to the quilt stiched it, folded it over and secured the other side.  

The coffee table had spindles in the middle so I knew I could secure the tablecloth to those. I stitched four leftover belt loops on the underside of the cloth to match the spindles' location. I threaded ribbon through it so that I could tie the cloth onto the table. 

This is a feature that I am really proud of and something you can't find in a store-bought item. After two years of use, I am pleased to say that although the tablecloth is not always straight, it stays on the table. 

Taming more chaos while upcycling

The blog post I wrote earlier this month on sew-your-own choas reducers is now the most popular post I have written. From that, I surmise I am not the only person who wants to tame the chaos in their house. I have more substantial projects that I would like to share, but I will wait on those so that I can share some more tips on reducing chaos with upcycled materials. 

Just before the turn of the new year, I realized that the downstairs drawers that held my sewing materials and the upstairs drawers that held my clothing were complete disasters. I have found that store-bought organizers never work for me in part because they are never the right size. So I organized them using upcycled materials. 

Vertical storage and old socks

Like many people, I read Marie Kando's The Life-Changing Magic of Tidying Up. While everything in the book sounded great, the only thing I actually implemented was storing clothes vertically.  Doing this allowed me to see everything, but the drawer would revert to chaos when I unfolded one of my many black pieces of clothing to see what it was or when the drawer was less full causing the vertically folded clothes to fall over. A few weeks ago, my son cleaned out his sock drawer and left several holey socks on his floor. He was adamant that I not mend them and they sat around for a few weeks because I could not think of a use for them. Finally, I had a burst of inspiration and decided I would cut the socks into rings and use them to hold my clothes together. 

I cut several socks, took each article of clothing out of my drawers, rolled them up and bound them with a sock ring. Then I put the clothing back in the drawer upright. The sock rings didn't constrict the clothing as much as a rubber band and keep the clothes  from becoming unfolded. Now, as pictured at the top,  I can see all the clothing in my drawers and they remain much neater. 

Sewing stuff, cardboard and berry containers

My sewing drawers are still a work in process as of today, but I have made several improvements to how I store ribbon, trim and scraps. Before the organizing project, the drawer was full of ziploc bags of ribbon, thread spools that didn't fit into the thread section of my sewing box and scrapsof various sizes. the times were getting all tangled up. 

I put the thread into take-out containers, preventing them from getting tangled up in other items. I folded several of my scraps vertically and placed them in berry containers. I spent the most time on ribbons and trim. I used a shoebox and cut cardboard to fit inside. I wrapped the ribbon and other trims on the cardboard and cut small notches in them so I could keep the ribbons from unraveling. I still have a lot of work to do on the sewing items, but one project at a time.

Sew your own chaos reducers

I find that store-bought organization containers never fit the space I have and just collect junk.  I am, however, a big fan of custom-made items. Over the past few years, I have made several items  I call chaos reducers. They are fabric pockets or baskets in the exact size I need them. I have made chaos reducers for television remotes, jar lids, pencils and plastic container lids.  

About a week ago I was looking in the cabinet that houses my blender, food processor and other items and I saw, well, chaos.  I have too much fabric and that is also creating chaos. So, I decided to feed two birds with one scone (because who actually wants to kill birds) so I whipped up a quick project to hang the grating and food processor slicing discs. 

I used an upholstery sample approximately 11.5 inches wide and 16.5 inches long with grommets pre-installed. The edges were already serged. For some reason, I really wanted the serged edges to be visible. Plus I didn't have enough width for a gusset construction, so I used construction techniques that might cause someone more expert to look askance. 

I started the project by laying down the two blades and folding the fabric to roughly fit and marking the fabric.  The pockets needed depth but the fabric was not wide enough so I  cut a strip 2 inches wide from the bottom.  I then cut the strip in half so had two about 2 inches wide and 5.25 inches long. 

I then serged the raw edges to keep the serge theme going. I folded over the top of the front part of the pocket  (or the bottom of the rectangle) about an inch and hemmed it. I then pinned on the stips flush to where the top of the pocket would be and I stitched about a quarter inch in. 

Then I folded the bottom of the rectangle up and I stitched on the other side of the stip from the inside. I could not stitch all the way down without catching parts of the pocket I didn't want to catch.  Then I hung it on the fridge to test it.  It gaped like crazy!

I thought through various options to reduce the gaping like installing a button and button hole. I eventually settled on quick and simple. My sewing machine has some decorative stitches I never had found an opportunity to use. So I tacked down the middle of the pocket with a few snow- flake stitches. 

That reduced the gaping quite a bit. I then hung the chaos reducer inside the cabinet using Command hooks and rearranged the items. Now everything fits and is more organized. 

Here are a few more chaos reducers I have made that hang in the kitchen.